First I'm a fan of your videos on YouTube. Thanks for all the info. I want to install body and neck binding on my 1992 Les Paul Studio. Do you have a video out showing the process? If so I can't seem to locate it. This guitar has also has an ebony fret board and will get a refret. (I'm confident about the fret install). Also what size binding would be correct for the neck and body? Any info would help...Thanks for the videos and sharing your knowledge...Look forward to your response...Thanks...Mike

When I did my LP Studio overhaul, I initially was going to bind it, but it really wasn’t worth the trouble. You’ll need a binding jig similar to what you can find on the stewmac site to cut your binding channel on the body, however, you’ll have to do the areas around the neck/body joint by hand with a chisel because you won’t be able to just rout the body without cutting into the neck once you get close enough to the junction. The other thing you have to take into consideration is that you’ll need to cut the rounded edge of the top of the body’s perimeter away completely before adding your binding. You might be able to get away with .060 binding, but the .090 would be more likely (or doing some kind of multi-ply).

The neck is the other part; you’d need to pull the fret board, remove the frets, cut your binding channel, bind the board, then glue it back on to the neck, and then fret it. It’s pretty involved, for sure. I use the .060 thick binding for fret boards and bodies.

Once you get all of that sorted, get ready to repaint it.